The International Independent Centre of Excellence for Spring Technology

Manual Load Test Machines PDF Print E-mail

LTM1 AND LTM2 LOAD TESTERS

LTM1-100 - Load Tester

LTM2-500 - Load Tester


Machine shown fitted with optional
fine worm drive and twin stops

 


  • High rigidity, robust loading frame.
  • Frame deflection compensation.
  • Extension and Compression springs.
  • Easy to use menu driven software.
  • 1 or 2 test loads / lengths with spring rate.
  • Tolerances may be set on measured values.
  • Numerical SPC analysis of results.
  • Up to 1000 results per test.
  • Multiple load and length units.
  • Single ultra-high resolution load range.
  • Grade 0.5% accuracy from 0.5% to full scale.
  • Embedded onboard computer.


Test screen showing
Spring Test results
and pass/fail.



Simple menu
driven software 
via keypad
  • Data automatically backed up in case of power down.
  • Wipe clean membrane keyboard with telephone key layout for ease of use.
  • Backlit LCD graphic display.
  • Special calibration software - password protected.
  • Auto-sensing 110 / 230vac. 50/60 Hz operation.

Options

  • Twin mechanical stops for rapid testing.
  • Selectable low ratio worm drive.
  • Extended travel.
  • Serial printer for test certificate printing.

 

For further details on technical specifications click here or contact
Mike Bayliss - This e-mail address is being protected from spambots. You need JavaScript enabled to view it / direct dial +44 (0)114 252 7990
Prices available upon request.