Institute of Spring Technology
Registered Office: Henry Street, Sheffield. S3 7EQ. UK.
Tel: +44 (0)114 276 0771 Fax: +44 (0)114 252 7997 E-mail: ist@ist.org.uk
Registration No. 3305326 VAT No. 690 0145 57 Registered in England

 


Home Up


ORDER FORM

Using this page Members and Non-Members can place an Order for the following:
Publications (Design Data Sheets, Costing for Estimating in the Spring Industry, Material Selector CD ROM, Mechanical Springs Text Book, Health & Safety Code of Practice - produced by UKSMA September 2003)
Software
Shot Peening Consumables
PLEASE NOTE ALL PRICES STATED ARE EXCLUDING VAT

Please Note - All Prices Stated are in Pounds Sterling

Publications Price £ Qty
For Design Data Sheets Please Tick For   Imperial or  Metric

 
Design Data Sheets - Full Set 100.00
1. Design of Helical Compression Springs 10.00
2. Buckling & Transverse Loading of Helical Compression Springs 10.00
3. Design of Helical Extension Springs 10.00
4. Design of Helical Torsion Springs 10.00
5. Design of Coiled Springs with Non Circular Coil Section 10.00
6. Design of Torsion Bars 10.00
7. Design Stresses for Helical Compression Springs 10.00
8. Stranded Wire Springs 10.00
9. Design Charts for Tension & Compression Springs 10.00
10. Design Charts for Tension & Compression Springs 10.00
11. Design Charts for Helical Torsion Springs 10.00
The above prices are for Non-Members Only - Members Prices are 50.00 for a Full Set and 5.00 For Individual Data Sheets.
Costing for Estimating in the Spring Industry 15.00
Produced by IST in May 2004 - Free to Members
Spring Material Selector CD ROM - Please Tick Language Required:
  English       French        Italian        German        Dutch
Members (Affiliated to the ESF via their National Associations) 203.00
Non Members 303.00
Mechanical Springs Text Book - Members 80.00
Mechanical Springs Text Book - Non Members 100.00
Health & Safety Code of Practice - Members 16.00
Health & Safety Code of Practice - Non Members 31.00
Produced by UKSMA September 2003
Software - Member Prices From New -  Non-Members See Below

Round Wire Compression Spring Validation (Base Module) 100.00
Compression Graphics Module 100.00
Compression Design and Optimisation Module 250.00
Compression Compass 200.00
Torsion Spring Validation (Base Module) 100.00
Torsion Graphics Module 100.00
Torsion Design Module 200.00
Extension Spring Validation (Base Module) 100.00
Extension Graphics Module 100.00
Extension Design Module 200.00
Extension Compass Module 200.00
Conical Spring Validation  100.00
Conical Graphics Module 100.00
Non Standard Round Compression Spring (Base Module) 200.00
Non Standard Round Compression Spring Graphics Module 200.00
Rectangular Wire Compression Validation 100.00
Rectangular Graphics 100.00
Disc Spring Validation (Base) 100.00
Disc Graphics 100.00
Spiral Spring Validation 150.00
Additional Site Licence (Unlimited Users) Per Spring Type 80.00
Upgrade Prices Available On Request For Existing Users
Software Non-Member Prices From New

Round Wire Compression Spring Validation (Base Module) 130.00
Compression Graphics Module 130.00
Compression Design and Optimisation Module 325.00
Compression Compass 260.00
Torsion Spring Validation (Base Module) 130.00
Torsion Graphics Module 130.00
Torsion Design Module 260.00
Extension Spring Validation (Base Module) 130.00
Extension Graphics Module 130.00
Extension Design Module 260.00
Extension Compass Module 260.00
Conical Spring Validation  130.00
Conical Graphics Module 130.00
Non Standard Round Compression Spring (Base Module) 260.00
Non Standard Round Compression Spring Graphics Module 260.00
Rectangular Wire Compression Validation 130.00
Rectangular Graphics 130.00
Disc Spring Validation (Base) 130.00
Disc Graphics 130.00
Spiral Spring Validation 195.00
Additional Site Licence (Unlimited Users) Per Spring Type 130.00
Upgrade Prices Available On Request For Existing Users
Shot Peening Consumables - Members Each
Almen A Strip 1 - 499 0.85
Almen A Strip 500+ 0.80
Almen N Strip 1 - 99 1.40
Almen N Strip 100+ 1.35
Almen C Strip 1.70
Almen Test Block 45.00
Almen Test Gauge (with digital indicator) 650.00
Minimum Order Charge £30.00
Shot Peening Consumables - Non Members Each
Almen A Strip 1 - 499 1.15
Almen A Strip 500+ 1.10
Almen N Strip 1 - 99 1.65
Almen N Strip 100+ 1.60
Almen C Strip 2.00
Almen Test Block 50.00
Almen Test Gauge (with digital indicator) 740.00
Minimum Order Charge £40.00

Company Details - Please Fully Complete

Name of Company:
Address:
Post Code: Country:
Telephone: Fax:
E-mail:
Internet:
Contact: Position:

Method of Payment - Please Complete
 Please tick one of the following for your preferred method of payment.

Bank Transfer Our Bank Account details will be sent with Order Confirmation.

Credit Card You will be contacted directly for your credit card details.

        

Invoice     Your Order No.
If method of payment is Invoice a Order Number is required.

please ensure all sections are completed before submitting

 

Back Home Up