|
 
| |
Non-Axial Load Tester
Non-Axial
Load Tester - Improves The Performance Of Your Springs By Testing All The Component
Forces
 |
A conventional spring load tester will measure
only the axial load of the spring using a single load cell.
Research has shown, however, that there are various non-axial forces
which act on the spring and which may cause mis-operation, premature failure and
hysteresis. Such forces include the twisting moment, shear force and
tilting moment.
You can now measure all these forces accurately using IST's design expertise and sophisticated measurement technology. |
IST produces two standard load testing
machines with the capacity for the measurement, analysis and display of both
axial and non-axial forces in compression springs.
Using six load cells, these machines offer as standard.
·
Full computer-control, for fully automatic testing with up to 10 test positions.
·
Full graphical display for results for shear force, tilting moments, torsional
moment and force polar plot.
·
Both numerical and graphical printouts.
·
Data save and recall facility, with user-friendly software.
·
Option for automatic measurement of coil diameter expansion under compression.
|
·
Production of test certificates.
·
Force accuracy:
·
Axial to 0.5% of reading.
·
Shear / Torque to 1% of reading
·
Automatic selection of either imperial or metric units.
·
Full convential axial measurement capabilities with multi-load ranges to improve
accuracy on smaller springs.
|
Special
Options
These standard machines can be modified according to your needs.
For example, you may require one or more of the following:
·
Diameter and bow measurement under load (MLT2 only).
·
Increased testing envelope.
·
Specified load ranges.
|
·
Specified spring end fixtures.
·
Software customised to your requirements.
·
Other supply voltages available.
|
For Further Information on
Technical Specifications Click
Here - For Other Details, including Prices Contact Mike Bayliss -
Email m.bayliss@ist.org.uk /
Direct Dial +44 (0)114 252 7990
|
